Quick Check® 600/800 Series User’s Guide 5 - 11 Troubleshooting the QCP or QCHSP ... http://www.americasblood.org/ AIAG - Automotive Industry Action Group ...
Text Previews (text result may be not accurate) Changing the Scanning Options.........................................3-10
Beeper Pitch.................................................................3-11
Extended Accuracy......................................................3-11
Decode Direction.........................................................3-11
Changing the Output Options.............................................3-12
Display Options............................................................3-12
Saving Data...........................................................................5-1
Checking the Print Buffer During Operation........................5-1
Printing Data.........................................................................5-2
Unrecognized Symbols.......................................................13-1
Troubleshooting..................................................................14-1
Technical Assistance..........................................................14-1
Online Technical Assistance...............................................14-2
For Further Information......................................................14-2
Product Service and Repair................................................14-2
Online Product Service and Repair Assistance..................14-3
Limited Warranty................................................................14-3
Quick Check 600/800 Series Users Guide1 - 1
1 - 2Quick Check 600/800 Series Users Guide
Unpacking the Quick Check 600/800 Verifier
When you first receive your
Quick Check 600/800 Verifi
er, you should unpack it
package for any shipping damage. If ther
e is evidence of damage, please keep
Quick Check 600/800 Verifier
Wand scanner (specific to the QC600 series)
Linear Imager (specific to the QC800 series)
AC Charger
Four AA NiCad batteries
Quick Check 600/800 Verifier Users Guide
Manual Package containing:
SymbolDescription
Term in manualTerm in software
W/NWN
Quick Check 600/800 Series Users Guide1 - 3
Noting the Verifiers Features
er is a full-featured bar
code verifier compatible
and easy to use pass/fail tester for
1 - 4Quick Check 600/800 Series Users Guide
Quick Check 600/800 Series Users Guide1 - 5
1 - 6Quick Check 600/800 Series Users Guide
Quick Check 600/800 Series Users Guide1 - 7
Installing the Batteries
The Quick Check 600/800 Verifier is ship
ped with four AA NiCad rechargeable
You must install the four NiCad
rechargeable batteries in the
Quick Check 600/800 Verifier bef
ore you connect
the printer to the unit. If you do
not install the batteries first, you
may damage the unit and consequen
tly void the warranty. Use
only the supplied batteries. If
you use other types of batteries
(such as alkaline) and attemp
t to recharge them, you could
cause the batteries to explode,
damage the unit, and possibly
cause a personal injury. Dam
age caused by attempts to
recharge any batteries, except th
ose supplied with the unit, voids
any and all Quick Check 600/800 Verifier warranties.
ItemSpecification
Weight
1.0 lb. (454 g) with wand attached and batteries
Temperature
Storage: -20 to 70C
Operational: 0 to 50C
Humidity5% to 95% RH non condensing
WARNING
1 - 8Quick Check 600/800 Series Users Guide
To Install the Batteries
1.Slide off the battery cove
2.Insert the four batteries into the
3.Slide the battery cover back in place.
The Quick Check 600/800 Verifier uses
rechargeable batteries. An AC charger
Quick Check 600/800 Series Users Guide1 - 9
Turning the Unit On and Off
X0.007 (0.178)0.003 (0.076)03
X0.013 (0.330)0.005 (0.127)05
X0.025 (0.635)0.010 (0.254)10
X0.020 (0.508)20
1 - 10Quick Check 600/800 Series Users Guide
Continue with the AutoStore
Clear
Change
2.bTo continue obtaining scan results with the AutoPrint/Store feature
Quick Check 600/800 Series Users Guide1 - 11
Continue
Clear
Continue with AutoStore
2.eTo continue obtaining scan result
print on the printer. The previously
stored results remain in the mem-
3.bTo print the stored records, press
isk next to
. Then press
. The stored records print.
remaining in the buffer. (Press
at the opening menu to display the
1 - 12Quick Check 600/800 Series Users Guide
Quick Check 600/800 Series Users Guide1 - 13
Three beeps (one long follow
1 - 14Quick Check 600/800 Series Users Guide
2.Hold the mouse wand as you would a co
3.Lightly pass the mouse wand over eit
Quick Check 600/800 Series Users Guide1 - 15
*QC600/800 Users Guide & Prog
ramming Manual . . . .QC600-800-UG
*QC600/800 Reflectance Page. . . . . . . . . . . . . . . . . . . . . . . . .QCRFPG
Printers
QC Standard Speed Dot Matrix Printer. . . . QCP68-USA/QCP68-EURO
QC High Speed Dot Matrix Printer . . QCHSP68-USA/QCHSP68-EURO
Printer supplies
Power supply for QCP & QCHSP Printers. . . . . . . . . . . . . . . . . . QCPAC
Printer ribbon for QCP & QCHSP . . . . . . . . . . . . . . . . . . . . . . . . . QCPR
Printer paper for QCP & QCHSP (4 roll/
pack). . . . . . . . . . . . . . . . QCPP
Interface cable for QC600/800 to QC
P or QCHSP . . . . . . . . . . . . QCPC
Wand Scanner
QCIW05V Pen Wand 5 mil visible red. . . . . . . . . . . . . . . . . . . . . .622301
QCIW06V Pen Wand 6 mil visible red. . . . . . . . . . . . . . . . . . . . . .622302
QCIW10V Pen Wand 10 mil visible red. .
. . . . . . . . . . . . . . . . . . .622299
QCMWI03 Mouse Wand 3 mil infrared .
. . . . . . . . . . . . . . .MOUSE3MIR
QCMWV03 Mouse Wand 3 mil visible
red . . . . . . . . . . . .MOUSE3MVR
QCMWI05 Mouse Wand 5 mil infrared .
. . . . . . . . . . . . . . .MOUSE5MIR
QCMWV05 Mouse Wand 5 mil visible
red . . . . . . . . . . . .MOUSE5MVR
QCMWI06 Mouse Wand 6 mil infrared .
. . . . . . . . . . . . . . .MOUSE6MIR
QCMWV06 Mouse Wand 6 mil visible
red . . . . . . . . . . . .MOUSE6MVR
QCMWI10 Mouse Wand 10 mil infrared
. . . . . . . . . . . . . .MOUSE10MIR
QCMWV10 Mouse Wand 10 mil visibl
e red . . . . . . . . . .MOUSE10MVR
QCMWI20 Mouse Wand 20 mil infrared
. . . . . . . . . . . . . .MOUSE20MIR
QCMWV20 Mouse Wand 20 mil visibl
e red . . . . . . . . . .MOUSE20MVR
1 - 16Quick Check 600/800 Series Users Guide
Quick Check 600/800 Series Users Guide2 - 1
Quick Start Guide
If you are familiar with bar
code verifiers, this secti
2 - 2Quick Check 600/800 Series Users Guide
The standard deco
Use arrow keys to view data
7.Print your scan results
If the Quick Check 600/800 Verifier is
turned on, results print automatically
Quick Check 600/800 Series Users Guide3 - 1
Changing the Settings
customize: specifications (
applications and symbologies)
, test criteria, scanning
options, and output options. Each option
has several items that you can turn on,
3 - 2Quick Check 600/800 Series Users Guide
Quick Check 600/800 Series Users Guide3 - 3
* The message length specification for each
symbology is listed. Although you can enter
Fixed Msg Len*:
Fixed Msg Len*:
Fixed Msg Len*:
3 - 4Quick Check 600/800 Series Users Guide
The Magnification (Mag) Factor applies
Quick Check 600/800 Series Users Guide3 - 5
3 - 6Quick Check 600/800 Series Users Guide
Wide-to-Narrow Ratio
element widths, including Codabar, Interlea
ved 2 of 5, and Code 39. W/N is the
Quick Check 600/800 Series Users Guide3 - 7
6.To change which symb
Press
or
3 - 8Quick Check 600/800 Series Users Guide
To select an application:
1.Display the menu that begins
in the scan grade is
one (with Extended
Quick Check 600/800 Series Users Guide3 - 9
3 - 10Quick Check 600/800 Series Users Guide
Consider the symbol grade as
the average resulting from
scans you take from all
over the symbol. The ISO/IEC standard r
equires you to obtain
ten scans of each
To change the test criteria:
1.Display the menu that begins
Quick Check 600/800 Series Users Guide3 - 11
Beeper Pitch (raise or lower)
Extended Accuracy
Decoding direction (both ways or forward only)
You can change the pitch of
the verifiers beeper. Highe
r pitches seem to sound
louder. You can also turn off the tone.
The default is 16.
The range includes
3 - 12Quick Check 600/800 Series Users Guide
Quick Check 600/800 Series Users Guide3 - 13
Symbol type
Wide-to-narrow ratio (traditional)
Light reflectance (traditional and ISO/IEC)
Dark reflectance (traditional and ISO/IEC)
Symbol contrast (ISO/IEC)
Reflectance minimum/maximum (ISO/IEC)
Edge contrast minimum (ISO/IEC)
Defects (ISO/IEC)
Message length
Bar growth (traditional)
3 - 14Quick Check 600/800 Series Users Guide
When you have the AutoPrint/Store fe
connected to your verifier, or your printe
r is connected, but
is turned off, your
When you have the AutoPrint/Store fe
turned on) or to store your
data (if a printer is not conn
ected or is turned off).
Quick Check 600/800 Series Users Guide3 - 15
3 - 16Quick Check 600/800 Series Users Guide
To unlock the unit:
1.Scan the Unlock Specs a
Quick Check 600/800 Series Users Guide3 - 17
RI & RD, P.C.S., Symbol Contrast, Rmin/Rmax, Modulation, EC(min),
Defects, Message Type, Message Length or Check Character
Error Override: Yes or No
LEDs: P/F Criteria or Bar Growth
Printer Type: (Choose One)
QCP, HSP, SSP
Printout: Long form or short form
AutoPrint/Store: On or Off
With profile: Yes or No
U.P.C./EAN/JAN
Enable: On or Off
Magnification Factor? (Choose One)
Expand UPC-EO: Yes or No
Enable: On or Off
Character Check: None or Checked
3 - 18Quick Check 600/800 Series Users Guide
Check digits: 1 or 2
Fixed message length: None or sele
Quick Check 600/800 Series Users Guide3 - 19
To use a customized Command Code:
1.Scan the Command Code for the
3 - 20Quick Check 600/800 Series Users Guide
Quick Check 600/800 Series Users Guide4 - 1
Reviewing Scan Data
Reviewing Scan Results
4 - 2Quick Check 600/800 Series Users Guide
four in the upper portion, two in the middle
and four in the lower portion. Multiple
Quick Check 600/800 Series Users Guide4 - 3
4 - 4Quick Check 600/800 Series Users Guide
Quick Check 600/800 Series Users Guide4 - 5
1.Enter the Scanning Options Extended Ac
4 - 6Quick Check 600/800 Series Users Guide
The text on the other lines of the
display depends on the Extended Accuracy
after the verifier calculates the fina
l symbol grade shows the symbol grade
and the results of the last scan grad
e only, but does not show each scan
scan grade may be helpful if you are tr
Quick Check 600/800 Series Users Guide4 - 7
4 - 8Quick Check 600/800 Series Users Guide
indicate the scan grade the symbol receiv
ed. In this case, the A, B and C LEDs
One long beep followed by one shor
One long beep followed by three shor
Quick Check 600/800 Series Users Guide4 - 9
4 - 10Quick Check 600/800 Series Users Guide
symbologies with two element widths
including Code 39, Interleaved 2 of 5 an
d USS-Codabar. W/N is not meaningful
for the other symbologies and is not disp
layed. When measured, the W/N value
symbology. If the W/N Ratio is
within these limits, it is
rated OK! or pass. If the
Scanning variations such as acceleration
can cause bar or space deviations due
ISO/IEC Decodability is a graded meas
ure of how close a given scan comes
Character averaged decodability
Quick Check 600/800 Series Users Guide4 - 11
3.Press
4 - 12Quick Check 600/800 Series Users Guide
from spaces (Rmax or RI) and minimum dark
reflectance from bars (Rmin or Rd).
Fail if not satisfied
Pass if Rd/RI
Fa il if Rd/RI 50%
C if
D if
Edge contrast (min)
C if
D if
Defects
C if
D if
Quick Check 600/800 Series Users Guide4 - 13
Note:Certain high reflectance mate
Alternately, you can consider Rd
50% RI. RI may be rated LO!, but it is never
Symbol contrast, SymContr, is a graded
he criteria that edge contrast must be
Modulation is a ratio of the edge contra
st minimum value divided by the symbol
4 - 14Quick Check 600/800 Series Users Guide
5.To resume scanning, start at
Quick Check 600/800 Series Users Guide4 - 15
and the result, either CkChr Checks if it pa
sses or Check Character Fails if it fails.
4 - 16Quick Check 600/800 Series Users Guide
Using SSTR Codes to Review Data
A Single Scan to Result (SSTR) Code is
a bar code symbol that tells the verifier
Quick Check 600/800 Series Users Guide4 - 17
ons, Display Options line.
lower result lines using the Di
Options"on page 3-12
4 - 18Quick Check 600/800 Series Users Guide
symbol. For information on proper sc
an technique and calibration, see
2, Quick Start Guide
To use the Quick Check Verifier
Quick Check 600/800 Series Users Guide5 - 1
Saving and Printing
Saving Data
the Quick Check 600/800 Verifier, or a prin
ter is connected but not turned on, you
can store or save, the scan results in the
verifiers print buffer. You can print the
To save scan data:
5 - 2Quick Check 600/800 Series Users Guide
To check the print buffer during operation:
1.Display the menu that be
. The opening
print. Once printed, the stored re
sults are removed from the verifiers
memory; however, the resu
lts from the last scan
remain in the buffer.
Quick Check 600/800 Series Users Guide5 - 3
2.Scan a bar code symbol.
5 - 4Quick Check 600/800 Series Users Guide
Quick Check 600/800 Series Users Guide5 - 5
***Quick Check 600***
Interleaved 2/5
- Extended Accuracy! -
Avg Bar Err = -.05XOK!
Wide/Nar Ratio = 2.5OK!
Decodability = 53%뀀B
Symbol Total = 055X
Prnt Contr Sig = 92%OK!
Reflect(Light) = 86%OK!
Reflect(Dark) = 05%OK!
Symbol Contrst = 81%ꀀA
R(min)/R(max) = 06%ꀀA
Modulation = 91%ꀀA
EdgeContr(min) = 73%ꀀA
Defects = 05%&#x-0.9;ꀀA
Message Length = 06OK!
No Check Character
Bar Growth IN TOL
Traditional Tests -PASS-
Format Tests -PASS-
Symbol Grade
Av g. 4.0 = A/06/660
5 - 6Quick Check 600/800 Series Users Guide
Quick Check
Quick Check
damage. If there is evidence of damage,
please keep ALL packing materials and
Printer
One roll of paper
Power supply
Never place the printer where it
Never apply power while you are pluggi
Do not print without paper or a ribbon
Do not subject the printer to temperat
ures below 5 C or above 40C during
Insert the connectors so that a slight
pressure seats the cable properly. Never
Quick Check 600/800 Series Users Guide5 - 7
QuickCheck Printer (QCP) and QuickCheck High Speed Printer (QCHSP)
A three-position power switch on the prin
5 - 8Quick Check 600/800 Series Users Guide
The printer has a replaceable cartridge ri
bbon. Replace the paper roll when it is
To turn on and off the QCP or QCHSP:
1.To turn on the printer, press the powe
2.To turn off the printer, pr
ess the power switch into th
e Off (down left) position.
After you turn off the printer, wait at
turn on the power
Do not pull paper out of the ba
ck of the printer as this will
damage the mechanism.
4.Unroll several inches of
WARNING
Quick Check 600/800 Series Users Guide5 - 9
5.Slide the papers straight edge into
5 - 10Quick Check 600/800 Series Users Guide
Quick Check 600/800 Series Users Guide5 - 11
Troubleshooting the QCP or QCHSP
For the QCP, select
For the QCHSP, select
5 - 12Quick Check 600/800 Series Users Guide
Quick Check 600/800 Series Users Guide6 - 1
Background Information
6 - 2Quick Check 600/800 Series Users Guide
the verifier include:
Quick Check 600/800 Series Users Guide6 - 3
6 - 4Quick Check 600/800 Series Users Guide
Quick Check 600/800 Series Users Guide6 - 5
check character
is a character placed in a pr
6 - 6Quick Check 600/800 Series Users Guide
How a Bar Code Verifier Works
Quick Check 600/800 Series Users Guide6 - 7
6 - 8Quick Check 600/800 Series Users Guide
Quick Check 600/800 Series Users Guide7 - 1
Using DataMatch
Understanding the DataMatch Feature
Display (append) the database informati
on to the decoded data so both types
Replace the first line of the verifier display with the database
Verify that the symbol
7 - 2Quick Check 600/800 Series Users Guide
UPC and EAN must include the check di
git and number system character or
If applicable, Code 39, Interleaved 2
Codabar and Code 39 should show ap
Codabar Start is represented by A and
Stop by B. Code 39 Start and Stop
MATCH
is the alternate message or database
descriptor for the symbol and its
To load the database into the verifier:
1.Structure your database as described above.
2.Connect the verifier to your computers
serial port using a PC Interface Cable
MSI or msi
European Article Number
Interleaved 2 of 5
Quick Check 600/800 Series Users Guide7 - 3
3.Open DataMatch (exe).
4.Select a database file.
5.Select the "Compr
7 - 4Quick Check 600/800 Series Users Guide
6.The program walks you th
rough the download steps
Quick Check 600/800 Series Users Guide7 - 5
Xchange Msg w
"Reviewing DataMatch Results"on page 7-5
6.To change the DataMatch option, press
7.Scan a symbol. If the DataMatch feature is turned on and
Reviewing DataMatch Results
After you scan a symbol, one of the foll
owing displays appears, depending on the
If you selected
Append DMatch
, the information from the database
If you selected
, the information from the database
appears on the first line of the verifi
ers display. It
replaces the scans
If you selected
Verify Only
and the scanned bar code symbol is
7 - 6Quick Check 600/800 Series Users Guide
Quick Check 600/800 Series Users Guide8 - 1
Using a Quick Check 800 Verifier
professional tool for verifying the readabi
lity and standards co
mpliance of printed
Products Series 600 verifiers and are desi
gned to not only provide the user with
all the features of the Series 600 models,
but also allow the ease of use of a non-
Only
the QC3800V can be used as
the non-contact input device
with a Series 800 unit. The QC
3800V should not be used with
any other decoder or terminal.
WARNING
8 - 2Quick Check 600/800 Series Users Guide
Reflectance-Based Information
When using the QC3800V, a special Perc
ent Decoded/Scanned Mode replaces
WN Ratio 2.3 OK!
Quick Check 600/800 Series Users Guide8 - 3
8 - 4Quick Check 600/800 Series Users Guide
Quick Check 600/800 Series Users Guide9 - 1
Error, Application, and Type Messages
TypeDisplay MessagePrintout Message
GENERALBAD # SystemBAD Number System
BAD 2nd ChekBAD 2nd Check Chr
BAD Addm ChkBAD Addendum Check
BAD AlphaNumBAD AlphanumericField
BAD Char SeqBAD Char Sequence
BAD CheckChr
BAD Symbol Check Chr
or Check Charctr Fails BAD
or ModCheck Fails BAD
BAD CtrGuardBAD Center Guard Patrn
BAD LH GuardBAD Left Guard Pattern
BAD Msg ChekBAD Message Check
BAD NumbersBAD Numeric Field
BAD RH GuardBAD Right Guard Pattrn
BAD SeparatrBAD Seperator
BAD User ChkBAD User Check Chr
ILLEGAL ChrILLEGAL Character
MISSING S/SMISSING Start/Stop
No Check CharctrNo Check Character
OK Check Chr
Check Charctr Passes OK!
or ModCheck Passes OK!
9 - 2Quick Check 600/800 Series Users Guide
DATABASEMatchMatch
NOT in DBaseNOT in Database
ABCDAdvShipmntAdv Shipmnt Notice
Authoriz #Authorization #
BAD ID Char.BAD ID Character
BAD UnitMeasBAD Unit of Measure
BooklandBookland
DestPostCdDest. Postal code
EAN ITF-14EAN ITF-14
EAN-13EAN-13
Package IDPackage ID
Product IDProduct ID
PurOrder #Purchase Order #
Qty/UofMesQuantity/UofMeas
SupID/Prt#Supl ID / Part #
SupID/Ser#Supl ID / Serial#
Supplier IDID Code (Supl)
UCC/EAN128UCC/EAN-128
UPC-AUPC-A
AIAGActual WgtActual Weight
BAD ID CharBAD ID Character
BAD SourceBAD Source Code
BAD Trace FdBAD Trace Field
ContainerContainer Type
Cust Part #Part # (Cust)
CustmrDefnCustomer Defined
CustOrder#Order # (Cust)
CustProdIDProduct ID (Cust)
CustTrace#Trace # (Cust)
TypeDisplay MessagePrintout Message
Quick Check 600/800 Series Users Guide9 - 3
ECV /VCVSECV /VCVS
Emissn TestEmissions Test
Employee#Employee Pass ID
EngrChgLv1Engr change Level
Gross Amt.Gross Amount
HeatProcssHeat/Process #
InternalInternal Only!
Len /WeightLength/theor.Wgt
MastrSerl#Serial # (Master)
MixedSerl#Serial # (MixedLd)
9 - 4Quick Check 600/800 Series Users Guide
BOOKLANDAndorraAndorra
ArgentnaArgentina
BAD Publsh #BAD Publisher #
BangldshBanglasdesh
BotswanaBotswana
BrazilBrazil
BulgariaBulgaria
CaribbenCaribbean
ChileChile
ChinaChina
ColombiaColombia
CostaRicCosta Rica
CroatiaCroatia
CubaCuba
CyprusCyprus
CzechlovCzechoslovakia
DenmarkDenmark
EgyptEgypt
EnglSpkgEnglish Speaking
EquadorEquador
FinlandFinland
FrenSpkgFrench Speaking
GambiaGambia
GermSpkgGerman Speaking
GhanaGhana
GreeceGreece
HongKongHong Kong
HungaryHungary
IcelandIceland
TypeDisplay MessagePrintout Message
Quick Check 600/800 Series Users Guide9 - 5
IndiaIndia
IndonesaIndonesia
IsraelIsrael
ItalyItaly
JapanJapan
KenyaKenya
KoreaKorea
LesothoLesotho
MalawiMalawi
MalaysiaMalaysia
MaldivesMaldives
MaltaMalta
MauritisMauritius
MexicoMexico
MoroccoMorocco
9 - 6Quick Check 600/800 Series Users Guide
SingporeSingapore
SloviniaSlovinia
SpainSpain
SriLankaSri Lanka
SurinameSuriname
SwedenSweden
TaiwanTaiwan
TanzaniaTanznaia
ThailandThailand
Tunesia Tunesia
TurkeyTurkey
UnescoUnesco
UruguayUruguay
VenzuelaVenezuela
YugoslavYugoslavia
ZambiaZambia
CCBBAAttributeAttribute
Autol UseAutologusUse Only
BAD CtrlCodeBAD Control Code
BAD GroupCodBAD Grouping Code
BiohazardBiohazard
BloodProdBlood Product
Dir DonorDirected Donor
Donation#Donation #
EmergyUseEmergency Use Only
ExpirDateExpiration Date
FDA Reg#FDA Regis. #
GroupLblGrouping Label
Hold!Hold for procsng
TypeDisplay MessagePrintout Message
Quick Check 600/800 Series Users Guide9 - 7
Hospital#Hospital #
IrradiatdIrradiated
NegAntCMVNeg for Anti-CMV
NotTransfNot For Transfn
TrnsfrBagTransfer Bag
Type ABlood Type A
Type A+Blood Type A+
Type A-Blood Type A-
Type ABBlood Type AB
Type AB+Blood Type AB+
Type AB-Blood Type AB-
Type BBlood Type B
Type B+Blood Type B+
Type B-Blood Type B-
Type OBlood Type O
Type O+Blood Type O+
Type O-Blood Type O-
HIBCCAlternat*Alternate*
AlternateAlternate
AltSecndryAlter.Secondary
BAD # SystemBAD # System
BAD DateBAD Date
TypeDisplay MessagePrintout Message
9 - 8Quick Check 600/800 Series Users Guide
BAD DescrptrBAD Descriptor
BAD FlagsBAD Flags
BAD Indus.IDBAD Industry ID
BAD QuantityBAD Quantity
BAD UnitMeasBAD Unit of Measure
(EAN ITF)(SCS /ITF)
Prim/Sec*Primary/Secondary*
Prim/SecdPrimary/Secondary
PrimaryPrimary
Primary*Primary*
ProviderProvider
Provider*Provider*
SecondarySecondary
Secondry*Secondary*
(UPC/EAN)(UPC/EAN)
Messages with an asterisk (*) indicate the symbol was
LOGMARSLOGMARS:-OK!LOGMARS:-OK!
SISACBAD DescrpterBAD Descriptor
BAD ISSNBAD ISSN
BAD Version#BAD Version #
Ver 1 92Ver 1 (1992)
Ver O 87Ver O (1987)
UCC/EAN-ITFBAD LogVarntBAD Logis. Variant
BAD PrefixBAD Prefix
FixdConFixed Content
ITF-14ITF-14
ITF-16ITF-16
TypeDisplay MessagePrintout Message
Quick Check 600/800 Series Users Guide9 - 9
SuffixSuffix
VariConVariable Count
VolumeVolume
WidthWidth
UCC/EAN-128AreaArea
BAD Appl.IDBAD Appli.ID
BAD Data ChkBAD Data Checksum
BAD Start CDBAD Start Code
Batch #Batch #
Bill ToBill To
Buy FromBuy From
Cell.ESNCellular ESN
DepthDepth
EAN SCSEAN SCS
9 - 10Quick Check 600/800 Series Users Guide
ProdDateProduction Date
QuantityQuantity
RollProdRoll Product
Serial#Serial #
Ship ToShip To
SHORT FieldSHORT Field
Symbol LONG!Symbol Too Long
UCC SerlUCC Serial SCS
SHORT FieldSHORT Field
Symbol LONG!Symbol Too Long
UCC SerlUCC Serial SCS
VolumeVolume
WidthWidth
TypeDisplay MessagePrintout Message
es Users Guide10 - 1
Flow Charts
10 - 2Quick Check 600/800 Series Users Guide
es Users Guide10 - 3
10 - 4Quick Check 600/800 Series Users Guide
es Users Guide10 - 5
10 - 6Quick Check 600/800 Series Users Guide
es Users Guide11 - 1
SSTR Codes
11 - 2Quick Check 600/800 Series Users Guide
es Users Guide12 - 1
Special Codes
12 - 2Quick Check 600/800 Series Users Guide
es Users Guide13 - 1
Unrecognized Symbols
13 - 2Quick Check 600/800 Series Users Guide
es Users Guide14 - 1
Customer Support
Troubleshooting
Check the version of the software installe
d in your Quick Check 600/800 Verifier
14 - 2Quick Check 600/800 Series Users Guide
Latin America
Europe, Middle East, and Africa
Online Technical Assistance
Hand Held Products provides service for
all its products through service centers
throughout the world. To obtain warranty
es Users Guide14 - 3
Online Product Service and Repair Assistance
Limited Warranty
Hand Held Products, Inc. ("Hand Held Pro
ducts") warrants its products to be free
time of shipment. This wa
rranty does not cover any H
and Held Products product
which is (i) improperly installed or used;
(ii) damaged by accident or negligence,
(D) operation under conditions beyond the
14 - 4Quick Check 600/800 Series Users Guide
User S Guide