Random Recipes

FEATURES UL class B (130°C) coil wire insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low pro�le and space saving - Height: 12.5 mm - Mounting space: 290 mm High sensitivity in small package - Operating power 110 to 140 mW - Nominal power 220 to 290 mW High insulation in small package - Insulation distance : 8.0 mm (between coil and contacts) - Dielectric strength : 5,000 VAC - Surge strength : 10,000 V Plastic materials - UL 94 �ame class V-0 - UL CTI level class 2 Plastic sealed type Various contact material options E.g.: Ordering code: JS-12E-K POWER RELAY 1 POLE - 8A Medium Load Control JS Series PARTNUMBER INFORMATION [Example] elay type ated voltage ating table at page 3 act con�guration orm C (SPDT) orm A (SPST-NO) act material e silver cadmium oxide ver nickel ver cadmium oxide e silver tin oxide truction verlay (available with Nil, N and F contact) verlay for lower current applications (available with act, not available for T, 5.0mm type) SPECIFICATION * Minimum switching loads mentioned above are reference values. Please perform the con�rmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. Item Non V3 type Contact Data Con�guration 1 form A (SPST-NO), 1 form C (SPDT) Construction Material (see part number information) Au plated Au plated Resistance (initial) Contact rating 8A, 250VAC / 24VDC Max. carrying current Max. switching voltage 400VAC / 150VDC Max. switching power 2,000VA / 192W Min. switching load * 100mA, 5VDC 10mA, 5VDC Life Mechanical operations Electrical AC contact rating (resistive load) operations (AgCd) operations (AgSnO operations (AgNi) DC contact rating (resistive load) operations (AgCd) operations (AgSnO operations (AgNi) Coil Data Rated power (at 20 °C) Operate power (at 20 °C) Operating temperature range -40 °C to +85 °C (no frost) Timing Data Operate (at nominal voltage) Release (at nominal voltage) Resistance (initial) Dielectric strength Open contacts 1,000VAC (50/60Hz) 1min Contacts to coil 5,000VAC (50/60Hz) 1min Surge strength Coil to contacts 10,000V / 1.2 x 50µs standard wave Clearance Creepage Voltage Pollution degree Material group Category C / 250V (reference voltage) (VDE 01106) Vibration resistance Misoperation>1us 10 - 55 - 10 Hz double amplitude 1.65mm Endurance 10 - 55 - 10 Hz double amplitude 3.3mm Shock Misoperation>1us Min. 100m/s² (11 ± 1ms) 3 directions; 36 shocks (18 with coil energizing, 18 no coil energizing) Endurance Min. 1,000m/s² (6 ± 1ms) 3 directions, no coil energizing 18 shocks Weight Approximately 8.0 g COIL RATING Rated Coil Voltage Coil Resistance Must Operate Voltage Must Release Voltage Max. Coil Voltage Rated Power Type Compliance Contact rating Flammability: UL 94-V0 (plastics) Contact material: Nil, E 8A 24VDC (resistive) 100k 8A, 250VAC (resistive) 100k 10A, 30VDC (resistive) 10A, 250VAC (resistive) 1/4HP, 125VAC / 250VAC 1/3HP, 125VAC 1/2HP, 250VAC Pilot duty: C150, B300 Pilot duty: 0.27A, 250VDC 8A 24VDC (resistive) 100k 8A, 250VAC (resistive) 100k 10A, 30VDC (resistive) 10A, 250VAC (resistive) 1/4HP, 125VAC / 250VAC 1/3HP, 125VAC 1/2HP, 250VAC Pilot duty: A300, B300 8A, 24VDC 8A, 250VAC CSA C22.2 No. 14 8A 250VAC (cos JS-( )D-K, JS-( )F-K: 6A, 250VAC, (cos JS-( )MD-K, JS-( )MF-K: 8A, 250VAC SEMKO Rated voltage (V): 250 Rated current (A): 8 (2) or 8 CHARACTERISTIC DATA Schematics PC board mounting hole layout (BOTTOM VIEW) Schematics JS-MN-KT Schematics PC board mounting hole layout (BOTTOM VIEW) PC board mounting hole layout (BOTTOM VIEW) Unit: mm General Information All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005. ndment to Directive 2002/95/EC) All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes : http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. erial has been verified to be compatible with PbSn assembly process. Recommended Lead Free Solder Profile Recommended solder Sn-3.0Ag-0.5Cu. RoHS Compliance and Lead Free Information Moisture Sensitivity Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. Tin Whiskers Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length er was found by our in house test. We highly recommend that you con�rm your actual solder conditions Flow Solder condition: Pre-heating: Soldering: Solder by Soldering Iron: Soldering Iron Temperature: Duration: Fujitsu Components International Headquarter Of�ces Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components Europe Fujitsu Components Europe B.V. 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Paci�c Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Web: http://www.fujitsu.com/sg/services/micro/components/ ©2012 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users’ own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and af�liated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and af�liated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or �tness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. March 23, 2012