1.Follow ¨RECEPTACLE DISASSEMBLYˇ steps 1 through 3. 2.Follow steps 1 through 2. 3.Strip conductor insulation to the dimensions shown in Figure 4L. Installation & Maintenance Information SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE 1.Follow ¨RECEPTACLE DISASSEMBLYˇ steps 1 through 3. 2.Follow steps 1 through 2. 3.Strip conductor insulation to the dimensions shown in Figure 4L. Installation & Maintenance Information SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WARNING To avoid electrical shock or electrocution, plugs (with exposed contacts) must not be used as the power source, as the user may come in contact with energized contacts or other compo- nents while attaching locks or hasps in the lockout/tagout hole WARNING To avoid electrical shock or electrocution, plugs (with exposed contacts) must not be used as the power source, as the user may come in contact with energized contacts or other compo- nents while attaching locks or hasps in the lockout/tagout hole